2026 Update – Revamped entire guide to link to manufacturer pages that list all compatible attachments, so that you can quickly browse the full selections.
You get a hold of a great power rack or squat rack, but then you find out that the company doesn’t make the attachments / accessories that you want.
No problem! You should be able to find a compatible attachment or accessory, as long as your rack is made with one of a few standard configurations.
Table of Contents
The key specs are:
The tubing size of the uprights, as above, typically one of: 2″x2″, 2″x3″, or 3″x3″.
Racks made in China usually use metric sizing. This applies to a lot of brands featured here. They don’t advertise the fact, and you would have to ask them or run into the problem yourself. The tables they are organized in identify them as such.
The hardware/peg diameter that fits into the holes in the uprights, as above. Varies from 1/2″ to 1″. Going by the peg diameter is more consistent across brands than the hole size that is cut somewhat larger than the peg.
The hole spacing in the uprights, ie: the distance between holes on center, as above. This is only applicable for attachments that use 2 holes, the second using a locking pin.
2″ spacing is becoming the standard. Some racks have Westside spacing, which is 1″ spacing at a certain height range for setting bench press safety bars just right, and otherwise 2″ spacing above and below that.
An attachment can fit in a larger hole than it’s made for, but it will be able to wiggle and maybe tip down a little, depending on the snugness of the bracket that goes over the tubing.
Similarly, attachment brackets can fit onto slightly smaller tubing than what they were designed for. This can be less bad than the wrong peg size, because you can glue shims (UHMW plastic or wood) to the inside of the attachment’s bracket to make it fit. Some attachments work well enough even if they’re loose. Some don’t have enough pressure put on them to be a safety issue, like a battle rope anchor, but it could still rattle.
Lastly, the steel gauge (wall thickness) of rack tubing does not factor into compatibility. The tubes are fabricated to an outside diameter spec.
For fitting 3×3 attachments onto 2×3 tubing, or 2×3 attachments onto 2×2 tubing, an Etsy seller is making these adapters to fill the void in the bracket.
I don’t recommend you use load-bearing attachments that don’t fit quite right, such as J-hooks, steel safety arms, or plate holders, unless you have a good way of retrofitting it to be snug enough. Use some common sense, visualize it, and you’ll get the idea.
In many cases attachments that use a locking pin to secure the attachment into a second hole on the rack’s upright won’t line up the same on all racks. Normally this is the difference in metric and imperial (inches) hole spacing. As much as you want it to work, under most circumstances you won’t get the locking pin in. The offset starts at 1/16″ per hole and widens cumulatively.
If you’re thinking of foregoing the locking pin or buying a thinner one, and you have to ask for confirmation on whether it’s safe, you probably shouldn’t do it.
Rogue has among the best and most consistent quality. Cheap Amazon-only brands are the worst and might be unsafe, and we avoid promoting them when possible. Most other brands are somewhere in the middle or sometimes as good as Rogue.
Size categories ordered smallest to largest.
Titan X-2 (discontinued)
Discontinued size. The Titan T-3 Multi Grip Pull Up Bar is compatible with this rack (thanks TJ!).
Granite Fitness Series 22 racks (discontinued)
Powerline PPR1000, Northern Lights Crossbox (discontinued)
| Attachments List | Popular | Notes |
|---|---|---|
| Powerline attachments | – U-Link / Rope Anchor – T-Bar Row Attachment / Landmine – Weight Plate Horn | See the Options links on the PPR1000 product page. They aren’t organized well anywhere else. |
Titan Fitness T-2, Giant Lifting 2X Series
50mm is a hair smaller than 2″. These are generally compatible with 2×2 racks. However, 2×2 attachments using a second hole and hitch pin are incompatible.
This size is considered a “budget” rack, so there are typically only a few attachments.
| Attachments List | Popular | Notes |
|---|---|---|
| Titan T-2 Series attachments >> Amazon prices are lower in some cases. | – Landmine – Spotter Arms – Dip Bars – Weight Plate Holders | |
| Giant Lifting 2X Series attachments (use code TWOREP for 5% off) | – Mag Pins – Landmine – J Cups |
Powerline PPR200X / PPR500, Best Fitness BFPR100, Valor BD-7 / BD-33, Rep Fitness PR-1000 / PR-1050 / PR-1100, Fringe Garage Series Squat Cage, Legend Fitness Varsity Series, Get Rx’d Pro Power Cage, Vanswe Power Rack, TDS 1000lb Power Squat Rack, Fitness Reality 810XLT, Mikolo Fitness F4 / K6, Amstaff PR100 / DF1161A / TP006D (discontinued)
This size is considered a “budget” rack, so there are typically only a few attachments, and some manufacturers don’t seem to offer any.
| Attachments List | Popular | Notes |
|---|---|---|
| Rep Fitness PR-1000 Series attachments | – Spotter Arms – Weight Storage – Dip Station – Landmine – Sandwich J Cups | |
| Fringe Garage Series attachments | – Mammoth Belt Squat – Weight Storage – Spotter Arms | |
| Synergee Fitness attachments | – Plate Storage – Safety Arms – Dip Handles | |
| Valor BD-7/BD-33 attachments | – Dip Handles – Spotter Arms – Weight Plate Storage | |
| Mikolo Fitness attachments | – Lateral Raise – Leg Extension & Curl – Lateral Raise & Chest Fly – Magnetic Hitch Pins | Look for 2×2 in the title. |
ForceUSA MyRack only.
60mm is 2.36″, way off from all imperial sized racks. These attachments might fit the metric racks in the next section well enough that take 16mm pegs.
| Attachments List | Popular | Notes |
|---|---|---|
| MyRack attachments | – Safety Slings – Monolift – Dip Handle – J Hooks Pro – Landmine |
Bells of Steel Residential Rack / Utility Rack / Light Commercial Rack / Brute Rack / Folding Rack / Combo Rack
60mm is 2.36″, way off from all imperial sized racks. Some attachments in the 13mm peg section above might fit well enoough.
| Attachments List | Popular | Notes |
|---|---|---|
| Bells of Steel strength attachments Bells of Steel weight storage attachments | – Seal Row Pad – Y-Dip – Spotter Arms – Landmine – Sandwich J Cups | Look for the 2.3″ size option on the product pages. |
Powertec WB-PR / P-PR (discontinued), Hulkfit Power Cage
60mm is 2.36″, way off from all imperial sized racks.
| Attachments List | Popular | Notes |
|---|---|---|
| Powertec attachments | – Premium J Hooks – Spotter Arms – Weight Storage | Look for ones that fit 2 3/8″ uprights per the product descriptions. |
Valor BD-11 / BD-41, Amstaff TR023 (discontinued) / TR025 (discontinued) / SD1050 (discontinued)
| Attachments List | Popular | Notes |
|---|---|---|
| Valor BD-11/BD-41 attachments | – Dip Handles – Spotter Arms – Weight Storage |
Titan Fitness T-3 / T-6 (discontinued)
Slightly smaller than 2″x3″, and pegs slightly larger than 5/8″. Generally compatible with 2×3 racks except for attachments using a second hole, because of the metric hole spacing.
| Attachments List | Popular | Notes |
|---|---|---|
| Titan T-3 attachments >> Amazon prices are lower in some cases. | – Safety Spotter Arms – Safety Straps – Safety Strap Spotter Arms – Dip Bars – Weight Plate Holders | |
Rogue Infinity (R-Series), FringeSport Kip Power Cage / 2×3 rigs (discontinued), Bolt Fitness Lightning Power Racks, Synergee Fitness 2300 Series
| Attachments List | Popular | Notes |
|---|---|---|
| Rogue Infinity attachments | – Speed Bag Platform – Battle Rope Anchor – Matador – Spotter Arms | They have focused away from their Infinity line and don’t have as many attachments as they used to. |
| FringeSport 2×3 attachments | – Mammoth Belt Squat – Safety Spotter Arms – Dip Station – Plate Storage – Landmine | |
| Synergee Fitness attachments | – Plate Storage – Landmine – Safety Arms – J-Cups |
Sunny Health & Fitness Power Zone Power Cage
No other brands match this size. The attachments in the 2×3, 5/8″ peg section above should fit this rack well enough.
| Attachments List | Popular | Notes |
|---|---|---|
| Mikolo Fitness attachments | – Lateral Raise – Lateral Raise & Chest Fly – Magnetic Hitch Pins | Look for 2×3 compatibility in the product descriptions. |
Rep Fitness PR-3000 (discontinued)
Griffin Fitness GR3 Lite, Rep Fitness PR-4000, Titan X-3, Vulcan Flat Base Power Rack
Slightly smaller than 3″x3″, and pegs slightly larger than 5/8″. Generally compatible with 3×3 racks with 5/8″ peg holes except for attachments using a second hole, because of the metric hole spacing.
| Attachments List | Popular | Notes |
|---|---|---|
| Rep Fitness PR-4000 attachments | – ISO Arms – Dip Attachment – Sandwich J Cups – Weight Storage – Landmine | |
| Titan Fitness X-3 attachments >> Amazon prices are lower in some cases. | – Adjustable Lever Arms – Safety Straps – Spotter Arms – Dip Attachment – Roller J Hooks | |
| Griffin Fitness GR3 Lite attachments | – Monolift – Dip Attachment – Adjustable Lever Arms | Look for ones with “GR3 Lite” in the title. |
| Vulcan Strength attachments | – Spotter Straps – Dip Horn – Plate Storage | Look for ones with “Flat Foot Power Rack” in the title. |
Rogue Monster Lite, Stray Dog Strength, Bells of Steel Hydra, Body Solid GPR400 / SPR500 / SPR1000*, Granite Fitness
* The Body Solid SPR1000 takes 5/8″ pegs facing the front/back, and 3/4″ pegs on the sides. Many of its attachments are made to fit the side holes, which are incompatible with any other racks.
| Attachments List | Popular | Notes |
|---|---|---|
| Rogue Monster Lite attachments | – Mutant Metals Ultimate Dip Attachment – Velocidor – Pritchett Pad – Sandwich J-Cups – Ghost Roller J-Cups | |
| Bells of Steel Hydra strength attachments Bells of Steel Hydra storage attachments | – Shoulder Boulder / Chest Fly – Leg Curl / Leg Extension – Seal Row Pad – Lever Arms – Y-Dip | Look for the Hydra size option on each product page. |
| Synergee Fitness attachments | – Plate Storage – Landmine – Safety Arms | |
| Stray Dog Strength attachments | – Alpha Single Utility Roller – GOAT – Utility Loop | Select the 5/8″ size. |
Mark Buffalo wrote a guide on how to fit the Titan X-3 lat pulldown on a Rogue Monster Lite rack.
American Barbell power racks, elitefts R3 / Collegiate / ISO
See the 3×3, 5/8″ section above for more attachments that will fit these racks well enough.
| Attachments List | Popular | Notes |
|---|---|---|
| American Barbell attachments | – Multi-Use Pin – Sandwich J Hooks – Dip Bar – Landmine | |
| elitefts attachments | – Dual Roller – Standing Leg Curl – Slider Monolift – Single Leg Squat – Jammer Arms |
Titan’s TITAN Series, Rep Fitness PR-5000, Vulcan Strength Racks (most), Griffin Fitness GR3, Giant Lifting 3X Series, Fringe Sport Osprey Power Cage / 3×3 rig, Get Rx’d RX3 / Goliath rack (discontinued), Fray Fitness Savage Series (out of business)
Slightly smaller than 3″x3″, and pegs slightly smaller than 1″. Generally compatible with 3×3 racks. The attachments here with a locking pin using a second hole, such as spotter arms, can even sometimes fully fit on 3×3 racks because the smaller peg size somewhat makes the attachment drop a little lower and reach the slightly wider spaced hole to lock into.
An exception: There have been reports of Titan’s regular J-hooks not fitting over 3×3 tubing.
| Attachments List | Popular | Notes |
|---|---|---|
| Rep Fitness 5000 Series attachments | – Strap Safeties – Dip Station – Landmine – ISO Arms – Spotter Arms | |
| Fringe Sport 3×3 attachments | – Mammoth Belt Squat – Weight Storage – Spotter Arms | |
| Get Rx’d RX3 attachments | – Dip Horn – Spotter Arms | |
| Titan Fitness TITAN Series attachments >> Amazon prices are lower in some cases. | – Safety Strap Spotters – Wrist Roller – Roller J Hooks – Dumbbell Holders – Weight Plate Storage | |
| Giant Lifting 3X attachments (use code TWOREP for 5% off) | – Mag Pin – Landmine – Dip Station | |
| Griffin Fitness GR3 attachments | – Monolift – Dip Attachment – Sandwich J Cups | Look for ones with “GR3” in the title or don’t specify. The “GR3 Lite” is a smaller size. |
Rogue Monster, Valor rig, Legend Fitness Performance Series, elitefts Origin Power Rack / Force Power Rack / Scholastic Half Racks / Garage Power Racks / Quick Ship Power Rack, Sorinex XL Series / Base Camp Series / Dark Horse, Bells of Steel Manticore, Bolt Fitness Storm Series, PRx Pro, Prime Prodigy, Inspire Fitness FPC1, Stray Dog Strength, Oak Club Manufacturing, Irwin Fitness, Ethos Power Rack 1.0 (discontinued), Amstaff Vortex Squat Rack / Summit Power Rack , Mikolo Fitness Anubis, Xmark Commercial / Viper, Crestone Rack / 370 (discontinued)
| Attachments List | Popular | Notes |
|---|---|---|
| Rogue Monster attachments | – Mutant Metals Ultimate Dip Attachment – Velocidor – Pritchett Pad – Adjustable Monolift – Ghost Roller J-Cups | |
| Bells of Steel strength attachments Bells of Steel weight storage attachments | – Shoulder Boulder / Chest Fly – Leg Curl / Leg Extension – Seal Row Pad – Lever Arms – Y-Dip | Look for the Manticore size option in the product descriptions. |
| Synergee Fitness attachments | – Plate Storage – Landmine – Safety Arms | |
| Sorinex attachments | – Sandwich J Hooks – Bulldog Pad – Jammer Arms – Leg Curl – Wrist Roller | Look for a fit of 1″ holes in the product descriptions. |
| Mikolo Fitness attachments | – Lateral Raise – Lateral Raise & Chest Fly – Magnetic Hitch Pins | Look for 3×3 in the titles or descriptions. |
| Legend Fitness Performance Series attachments | – Dip Attachment – Dual Landmine – Monster Hooks – Safety Arms – Plate Storage | Order by quote process only. |
| Oak Club Manufacturing attachments | – Magpin – Alpha Safety Arms – Klo Step Platform – Jay-M Short Bar Rack – James J Cups | |
| elitefts 3×3 attachments | – Dual Roller – Standing Leg Curl – Slider Monolift – Jammer Arms – Dip Attachment | They mainly use holes on the sides of the uprights, not front, so can be incompatible with other brands. Also look for the 1″ size in the product descriptions. |
| Prime Fitness Prodigy attachments | – Weight Plate Storage – Spotter Arms – Landmine | |
| Stray Dog Strength attachments | – Alpha Single Utility Roller – GOAT – Utility Loop | Select the 1″ size. |
For a high and low cable system that works on almost any power rack, see the Spud Inc Pulley System shown above.
If you only need a high pulley (for lat pulldowns and tricep pushdowns), see Giant Lifting’s pulley system for a much lower price.
This Rep Fitness dip station above fits on almost any rack with 1″ round safety bars (thanks Anthony!). The rack needs to have at least 21″ depth between the front and back uprights, which is the case for all freestanding racks and most floor-mounted racks except the most shallow ones. The rack’s hole spacing does not matter, as the bottom part of the attachment simply rests against wherever the lower safety bar is.
There are a couple solutions for power rack strap safeties if you can’t find a match. If you can get a brand of them with brackets that fit your rack but the straps are the wrong length, get two 2″ Stren-Flex slings of the right length to replace them with. They are extremely strong, with pertinent info labeled and a chart on that webpage with the pound ratings.
Your second option is a pair of Spud Inc suspension straps that hang off your rack’s top crossmembers.
Multiple questions on this in the comments prompted me to add this section.
You generally can’t add a rear rack extension – usually to accommodate weight plate storage – made for a different brand. The height of the holes off the floor and the rack width would have to be precisely the same.
Similarly, with extension feet meant to stabilize a rack, the holes would have to be precisely the same height off the floor, or they would float and defeat the purpose.
I have heard reports of people using these across brands, but in every case it seems the user made some modifications to make it work.
For the best compatibility going forward, I highly recommend getting a 3×3 rack taking 5/8″ pegs (Rogue Monster Lite compatible) or 1″ pegs (Rogue Monster compatible). Even you never buy a Rogue product, they lead the way in things like this.
Rogue appears to be de-emphasizing their 2×3 racks in favor of 3×3. Other manufacturers have seemed to follow suit. This doesn’t mean that nobody will make racks with 2×2 or 2×3 tubing. I believe that there will be a market for those lighter and cheaper racks for a long time, and they are not necessarily bad racks. The 3×3 attachments sell much better and are more numerous, because people who spend the extra money for a 3×3 rack are more likely to soup it up.
You might want to steer clear of racks that have metric sized tubing. They are harder to fit attachments on. Some of them fit ok.
View Comments
I'm looking to attach Titan's flying pull up bar to my Monster Lite half rack. I'm sure I can find nuts and bolts that should work, but do you have any insight on hole spacing?
So if I read below am I correct to understand titan x3 is not a true 3x3 1 inch and that Ethos power rack 1.0 is 3x3 1 inch. (I have this one). That suggests titan x3 attachments are not compatible with the ethos rack? I was looking at the x3 dip attachment. If I read the table correctly the rogue monster attachments are generally compatible with ethos.
Right, Titan attachments will not fit Rogue or Ethos, unless they happen to have certain attachments with sloppy fitting brackets to give that extra 1/16". The ones I've seen are fairly snug. Ethos and Rogue are compatible.
Anyone know where I can get flip down safeties compatible for a 36" deep T-3? Titan has been out for forever and has no estimated restock date. Similar to these but for 36" not sure if any other company would make anything compatible or not. Thanks, https://www.titan.fitness/racks/rack-accessories/t-3-series/flip-down-safety-bars-for-t-3-power-racks/400232.html
I have a Titan T3 short 36" deep rack. I got the Rep PR-3000 flip down safeties, and they fit and work OK on my rack. It's got a slight amount of play, but nothing I would consider unsafe. They're on clearance right now. Email Rep if you have questions. https://www.repfitness.com/strength-equipment/power-racks/pr-3000-series/rep-pr3000-flip-down-safeties
Nice! For safeties in particular that sounds like a reasonable fit, with the way they're supported on two uprights to negate the sloppy fit.
Awesome thanks man! The titan ones have play too anyway. Need to make sure they will be rated to hold a good amount of weight tho I will messsge rep and see what they say thanks!
I have a rogue r3 - which I believe is infinity. Are there any jammer arms that would fit? Thanks a ton for the help!!
Found one! These lever arms fit 2x3, 5/8" holes. I don't know anything about this company. If you buy it, please let me know how it goes, and perhaps I'll eventually start adding their stuff here.
https://boltfitnesssupply.com/main-product-id-446-lightning-series-adjustable-lever-arms-attachment
Dang I just looked and the company is not currently shipping. I sent an email to inquire tho! Thanks a ton brother.
Thanks so much! I’ll look into and research and look into company! If I buy I’ll let you know what I think and about the fit & functionality!!
Bought a Body-Solid GPR378 from Clist. Wondering if maybe the Rogue Monster Lite stuff might work. 3x3 on the BS.
Might be tough... The GPR378 has 1 3/8″ holes, 3×3 tubing, and 3″ hole spacing.
Thanks David. BTW, really like your website. So much great information. Did buy Rigers J-Hooks. For 5/8 & 1" holes. May not work, but reviews has some saying it did work for GPR378. So will give that a go.
I will have to look at Rigers. I don't think I've looked at their stuff yet. Let me know how it fits!
I'm planning on picking up a used Weider Pro 7500 Halfrack. It's an older rack. Do any of the manufacturers make dip bars that will fit?
I'm not sure what sizing Weider racks use, or even who owns the Weider brand for equipment anymore.
Yeah I’ve been trying to figure that out too. Seems like they got out of the equipment business. I’ll just get the measurements when I pick it up and go from there. Very helpful website. Thanks.
First, thanks for this list! I have a Prime Fitness rack and was looking to add some accessories at a non-Prime price. They use a 3x3 supports. I wanted to add the Titan dip station, but at 75mm it's too small. Does anyone know if it has plastic "spacers" that could be sanded down to give that extra clearance or is it just steel?
Can confirm, it fit on my Prime rack with no issues at all. No sanding or modification needed.
Thanks for sharing the results and saving me some worry!
I ordered an American Barbell rack (technically 3/4 but 11/16 is close) and just realized the official dip attachment is $250! Now I'm comfortable trying the Titan :)
Neither rack nor attachment will ship for 2-3 weeks, but I'll try to remember to update for anyone else!
The Y-dip has UHMW inserts that you might be able to sand down with a power tool, but you'll run into the screws.
I'm willing to give it a go...FOR SCIENCE! Thanks!
I have a rogue 390F and was looking at the Titan lat attachment and was trying to determine the fit with it. I've had luck with the smaller pulley system fitting, although very snug, but wanted to get something a bit cleaner without breaking the bank to much.
https://www.titan.fitness/racks/rack-accessories/t-3-series/lat-tower-short-height-rack-attachment-%7C-t-3%2C-x-3%2C-and-x-2-compatible/401035.html
I doubt it can even be reasonably jerry-rigged to fit the Rogue rack. Too many attachment points.
Awesome site. I have a Rep PR-3000 and it has been discontinued. Attachments are becoming harder to find for it. A little nervous about being able to get attachments for it in the future.. I thought the PR-3000 was 2x3 but missed the fine print until after buying. Will the approximately 1/8 inch difference in size mean I won't be able to use Rogue R-3 attachments with it?
Most of the R-3 attachments aren't likely to fit over the 3.15" dimension of the PR-3000 tubing. Certain attachments that don't wrap around that dimension of the tubing could fit, like the landmine base comes to mind.
Would Force USA my rack be compatible with bells of steel 60mmx60mm? They list 2.4” with 5/8” holes which seems very close.
I think you're right. I would bet that ForceUSA is the same 60x60mm. I'll see about adding them and the attachments shortly.
Hello David,
Unfortunately, they do not fit. I have the Force USA rack and ordered a set of J-cups from Bells of Steel.
The posts on the Bells of Steel cups are slightly larger than 5/8" so they will not fit in the holes of the MyRack.
Everything else appears to fit. Surprisingly, the BoS cups are not as tight against the post (I put one up using the 1" side holes to test fit). I can only assume BoS are not as tight with their tolerances as Force USA is.
Looks like there's an issue that some manufacturers go by the hole size and others go by the peg size. I'm not sure how to resolve this as far as the chart goes. I just measured my Titan rack holes and the pegs are under 11/16" while the holes are over 11/16". so this is going to be a nightmare to try to sort out.
Just a quick update. You are correct in your assumption. I measured the peg on the BoS j-hooks and they are 5/8" in diameter. The holes on the MyRack are 5/8" in diameter.
They are simply not compatible.
I've separated the MyRack into its own size. Thanks for the info!
Yeah. I ordered cheap calipers on Amazon to measure the difference between the two pegs, but I can tell you that just using a tape measure, the hole size on the MyRack is exactly 5/8" so the pegs on the MyRack accessories are smaller than 5/8". However, there is a clear size difference with the BoS pegs and the holes on the MyRack. I'll know exact measurements when the calipers come in, but, at the moment, it looks like the BoS pegs are larger than 5/8".